So many projects
The Emblaser 2 desktop laser cutter and engraver is a perfect combination of ease-of-use, size, power, and low price. Use it in the classroom, shop, or at home for a variety of projects.
So many materials
The Emblaser 2 can cut, mark or engrave a multitude of materials such as wood, cardboard, MDF, plastics, leather, cloth and so much more.
Safety first
Unlike traditional CO2 laser cutters, the Emblaser 2 is a Class 1 laser device, which is considered the safest. The device also does not allow for human access to laser radiation during operation. Other safety features include material ignition alert, built-in fume extractor to vent fumes outdoors, and optional Fume Filtration System to safely filter fumes for indoor use.
The large capacity bed allows materials as large as approximately 20 x 12 x 2 inches in size to be cut or engraved. The installed Air-Assist prevents scorching during cutting and engraving.
The Emblaser 2 comes with USB and Wifi connectivity and operates with LightBurn software for PC or Mac.
SafetyMaterial ignition alert. Built-in fume extractor to vent fumes outdoors or add the Fume Filtration System to safely filter fumes for indoor use | 
Precise AlignmentUse the built-in camera to overlay your design onto your project, taking out the guess work for alignment of the cut pattern onto the project material
| 
3D EngravingCreate stunning 3D engravings with depth or adjust sharpness to create sharp lines or soft fills with the automatic Z axis of the head |
Common Materials
| Type | Max. Thickness | Engrave/Cut | Notes |
| Fabric - Cotton | 3 mm | Y/Y |
|
| Fabric - Felt | 6 mm | N/Y | All colors except white |
| Leather - Brown Vegetable Tanned | 4 mm | Y/Y | Treatment &color dependant Air-Assist recommended |
Paper/Card - Corrugated Cardboard
| 6 mm | Y/Y |
|
| Paper/Card - Pasteboard | 2.6 mm | Y/Y |
|
| Paper/Card - Plain Paper | 3 mm | Y/Y | Any Color |
| Plastic - Cast Acrylic Black | 5 mm | Y/Y | |
| Plastic - Cast Acrylic Green, Red, Yellow (Opaque) | 3 mm | Y/Y |
|
| Plastic - Acrylic Translucent (Tinted) | - | Y/N | Engrave only |
| Plastic - Acrylic Blue | - | Y/N | Engrave only |
| Plastic - Acrylic Transparent & White | - | N/N | |
| Plastic - Polypropylene | 3 mm | Y/Y | Air-Assist recommended |
| Plastic - Styrene | 1.5 mm | Y/Y |
|
| Wood - Birch Plywood | 6 mm | Y/Y |
|
| Wood - Balsa | 10 mm | Y/Y |
|
| Wood - Hardwood Oak | 3.8 mm | Y/Y |
|
| Wood - MDF | 6 mm | Y/Y |
|
| Anodized Aluminum | - | Y/N | Engrave only |
| Slate | - | Y/N | Engrave only |
| Corkboard | 3.0 mm | Y/Y | Air-Assist required |
| Rubber - Non-Chlorine | 2.0 mm | Y/Y | Air-Assist recommended |
