So many projectsThe Emblaser 2 desktop laser cutter and engraver is a perfect combination of ease-of-use, size, power, and low price. Use it in the classroom, shop, or at home for a variety of projects. Click HERE to check out some projects you can do, or click HERE to read about what others have done.
So many materials
The Emblaser 2 can cut, mark or engrave a multitude of materials such as wood, cardboard, MDF, plastics, leather, cloth and so much more.
Unlike traditional CO2 laser cutters, the Emblaser 2 is a Class 1 laser device, which is considered the safest. The device also does not allow for human access to laser radiation during operation. Other safety features include material ignition alert, built-in fume extractor to vent fumes outdoors, and optional Fume Filtration System to safely filter fumes for indoor use.
The large capacity bed allows materials as large as approximately 20 x 12 x 2 inches in size to be cut or engraved. The installed Air-Assist prevents scorching during cutting and engraving.
The Emblaser 2 comes with USB and Wifi connectivity and operates with LightBurn software for PC or Mac.
SafetyMaterial ignition alert. Built-in fume extractor to vent fumes outdoors or add the Fume Filtration System to safely filter fumes for indoor use
Precise AlignmentUse the built-in camera to overlay your design onto your project, taking out the guess work for alignment of the cut pattern onto the project material
3D EngravingCreate stunning 3D engravings with depth or adjust sharpness to create sharp lines or soft fills with the automatic Z axis of the head
|Fabric - Cotton||3 mm||Y/Y|
|Fabric - Felt||6 mm||N/Y||All colors except white|
|Leather - Brown Vegetable Tanned||4 mm||Y/Y|
Treatment &color dependant
|Paper/Card - Corrugated Cardboard||6 mm||Y/Y|
|Paper/Card - Pasteboard||2.6 mm||Y/Y|
|Paper/Card - Plain Paper||3 mm||Y/Y||Any Color|
|Plastic - Cast Acrylic Black||5 mm||Y/Y|
|Plastic - Cast Acrylic Green, Red, Yellow (Opaque)||3 mm||Y/Y|
|Plastic - Acrylic Translucent (Tinted)||-||Y/N||Engrave only|
|Plastic - Acrylic Blue||-||Y/N||Engrave only|
|Plastic - Acrylic Transparent & White||-||N/N|
|Plastic - Polypropylene||3 mm||Y/Y||Air-Assist recommended|
|Plastic - Styrene||1.5 mm||Y/Y|
|Wood - Birch Plywood||6 mm||Y/Y|
|Wood - Balsa||10 mm||Y/Y|
|Wood - Hardwood Oak||3.8 mm||Y/Y|
|Wood - MDF||6 mm||Y/Y|
|Anodized Aluminum||-||Y/N||Engrave only|
|Corkboard||3.0 mm||Y/Y||Air-Assist required|
|Rubber - Non-Chlorine||2.0 mm||Y/Y||Air-Assist recommended|